Run .0019 thou. piston clearance on a new bore.
Mill head 25 thou.
Remount condenser to under the tank area.
Install case mounted chain tensioner.
Use 1980 swing arm or add length to stocker.
Use Dellorto 26 mm carb.
Sammy Miller shift lever. or 1980 lever.
Replace stock fork brace/fender mount with stronger unit.
(Optional): lower foot peg mounts one inch.
Lift up handlebars by mounting a pair of lower fork clamps underneath
the stock fork clamps and using longer allen bolts.
Cutaway mag cover for better access to chain, or use 80' mag cover.
Watch for cracks in frame around the top of the front down tubes. gusset if necessary.
You can safely mill 25 thou. off of the head for a little more power, this really helps if you ride at over 5,000 ft.
Subscribe to:
Post Comments (Atom)
There's so many things that life is, and no matter how many breakthroughs, trials will exist and we're going to get through it. Just be strong. See the link below for more info.
ReplyDelete#trials
www.ufgop.org
Pretty nice post. I just stumbled upon your weblog and wanted to say that I have really enjoyed browsing your blog posts. After all I’ll be subscribing to your feed and I hope you write again soon! ancheer folding electric mountain bike review
ReplyDelete